MIG Welder Sinergic Control

HELVI MIG/MAG generators in the “SILVERMIG” series feature synergic control which enables all the problems of regulating welding parameters (choice of material to be welded, diameter of wire and type of gas) to be solved in a completely automatic way.

This allows even welders with very little experience to obtain good results right from the start. A potentiometer is also provided. which allows the speed to be adjusted (fine regulation), so that a perfect weld can be produced.

Suitable for use in steel structural work and body shops for the welding of galvanizes metal, stainless steel and aluminium plating.

Particularly suited for the welding of aluminum, which is recognized automatically by the generator. All the generators can be used in completely automatic (Synergic) or manual mode by more experienced welders.

Standard accessories : MIG Torch with 3M cable (Air cooled), Earth clamp with cable 3M Optional accessories : Co2 Gas Regulator, Spool gun, Teflon liner, Aluminium feed rolls

Specifications
Description Unit SILVERMIG 259 SILVERMIG 309
Input Power (3 ph) 380V / 50 Hz
Power 60% KVA 5,9 8
Uo V 17 ÷ 38
Amp. Min-Max A 30 ÷ 240 30 ÷ 300
Amp. 60974-1 A 35% 230 30% 300
60% 175 60% 220
Adjust.Pos 10 16
Steel Ømm 0,6 ÷ 1,0 0,6 ÷ 1,2
Stainless St. Ømm 0,8 ÷ 1,0 0,8 ÷ 1,2
Aluminium Ømm 0,8 ÷ 1,2 0,8 ÷ 1,2
Brazing Ømm 0,8 ÷ 1,0 0,8 ÷ 1,0
Insulation - H
Protec. Degree - IP23S
Dimensions mm(LxWxH) 830x500x740
Weight kg 70 86
HELVI MIG/MAG generators in the “SILVERMIG” series feature synergic control which enables all the problems of regulating welding parameters (choice of material to be welded, diameter of wire and type of gas) to be solved in a completely automatic way.

This allows even welders with very little experience to obtain good results right from the start. A potentiometer is also provided which allows the speed to be adjusted (fine regulation), so that a perfect weld can be produced.

Suitable for use in steel structural work and body shops for the welding of galvanizes metal, stainless steel and aluminium plating. Particularly suited for the welding of aluminum, which is recognized automatically by the generator. All the generators can be used in completely automatic (Synergic) or manual mode by more experienced welders.

Standard accessories : MIG Torch with 4M cable (Air cooled), Interconnection cable 5M Earth clamp with cable 3 Optional accessories : Co2 Gas Regulator, Spool gun, Teflon liner, Aluminium feed rolls, External water cooling unit, MIG Torch with 4M cable (Water cooled)
Specifications
Description Unit SILVERMIG 419 SILVERMIG 499
Input Power
(3 ph) 380V / 50 Hz
Power 60% KVA 19 21,5
Uo V 18 ÷ 45 17 ÷ 47
Amp. Min-Max A 30 ÷ 400 35 ÷ 460
Amp. 60974-1 A 40% 400 60% 326 100% 255 60% 450 100% 350
Adjust.Pos 24 36
Steel Ømm 0,6 ÷ 1,6 0,6 ÷ 1,6
Stainless St. Ømm 0,8 ÷ 1,2 0,8 ÷ 1,2
Aluminium Ømm 0,8 ÷ 1,6 0,8 ÷ 1,6
Brazing Ømm 0,8 ÷ 1,2 0,8 ÷ 1,2
Insulation - H
Protec. Degree - IP23S
Dimensions mm(LxWxH) 1000x555x1340
Weight kg 159 185