Inverter Plasma Cutter

Plasma cutters, based on Inverter technology, guaranteeing accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The available cutting modes are: continuous, grid, gouging and CNC. Possibility to set the cutting current and to adjust the air pressure in a simple and precise way thanks to the handy knob. The EVO plasma cutters can signal the lacking or excessive air pressure through dedicated LEDs located on the front panel.

Standard Accessories: Plasma Torch H.70 (45A, 6M.Fit Connection) ; Ground Cable with Earth Clamp (4M, 25mm2 Connector)
Technical Specifications PC EVO 50.1
Plasma torch  H.70 (45 A) · H.FIT
Input voltage (1ph)  115V - 50/60Hz 230V - 50/60Hz
Power 60% 2,5 KVA 5 KVA
Max input current 26 A 25 A
No load output voltage  270 V 270 V
Range 20 ÷ 25 A 20 ÷ 45 A
Cutting current 25A @ 40% 45A @ 50%
20A @100% 32A @ 100%
Clean cut 25cm/min 8 mm 15 mm
Max Cut 11 mm 20 mm
Severance  12 mm 22 mm
Pierce  12 mm 12 mm
Required air capacity 220 l/min @ 5 bar
Insulation H
Protec. Degree IP22S
Power Source (LxWxH) 495x195x395 mm
Power Source Box  (LxWxH) 640x260x450 mm
Torch Box  (LxWxH) 500x80x400 mm
Weight box (machine + torch) /net  20,1 / 19,1 kg

Plasma cutters, based on Inverter technology, guaranteeing accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The available cutting modes are: continuous, grid, gouging and CNC. Possibility to set the cutting current and to adjust the air pressure in a simple and precise way thanks to the handy knob. The EVO plasma cutters can signal the lacking or excessive air pressure through dedicated LEDs located on the front panel.

Standard Accessories: Plasma Torch H.70 (45A, 6M.Fit Connection) ; Ground Cable with Earth Clamp (4M, 25mm2 Connector)
Technical Specifications PC EVO 50.3
Plasma Torch H.70 (45 A) · H.FIT
Input Voltage (3ph)  400V  50/60Hz
Power 50% 7 KVA
Max input current 14 A
U0 240 V
Range 20 ÷ 45 A
Cutting current 45A @ 50%
35A @ 100%
Clean cutting capacity 25cm/min  15 mm
Max cutting capacity  20 mm
Severance  22 mm
Pierce  12 mm
Required air capacity 220 l/min @ 5 bar
Insulation H
Protec. Degree IP22S
Power Source (LxWxH) 495x195x395 mm
Power Source Box  (LxWxH) 640x260x450 mm
Torch Box  (LxWxH) 500x80x400 mm
Weight box (machine + torch) /net  20,1 / 19,1 kg

Plasma cutters, based on Inverter technology, guarantee accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The front panel is provided with clear and simple graphics for the adjustment of the cutting current and to indicate the intervention of any of the internal safety devices. Designed to work with either PT, ST or PH torches according to your cutting requirements. The use of ST/PH torches improves the maximum cutting performance and increases the speed at which the cutting can be achieved. Suitable also for cutting with small CNC machines thanks to the specifically designed interface (connector on the back side for torch trigger, arc on signal and arc voltage reference)

Standard Accessories: Ground Cable with Earth Clamp (4M, 16mm2 Connector)
Technical Specifications PC EVO 76
Input Voltage (3ph)  220V  50/60Hz (3ph)  400V  50/60Hz
Power 60% 7 KVA 8 KVA
Max input current 26 A 15 A
U0 275 V 275 V
Range 20 ÷ 70 A 20 ÷ 75 A
Cutting current 70A @ 50% 75A @ 40% • 45A @ 100%
Protec. Degree IP22S IP22S
Dimens. (LxWxH) 545x255x415 mm 545x255x415 mm
Box (LxWxH) 665x305x460 mm 665x305x460 mm
Weight box/net  33,8 / 32,2 kg 33,8 / 32,2 kg

Plasma cutters, based on Inverter technology, guarantee accurate and clean plasma cut. Easy to handle and operate, these systems are suitable for cutting materials at high speed. The front panel is provided with clear and simple graphics for the adjustment of the cutting current and to indicate the intervention of any of the internal safety devices. Designed to work with either PT, ST or PH torches according to your cutting requirements. The use of ST/PH torches improves the maximum cutting performance and increases the speed at which the cutting can be achieved. Suitable also for cutting with small CNC machines thanks to the specifically designed interface (connector on the back side for torch trigger, arc on signal and arc voltage reference)

Standard Accessories: Ground Cable with Earth Clamp (4M, 25mm2 Connector)
Technical Specifications PC EVO 126
Input Voltage (3ph)  220V  50/60Hz (3ph)  400V  50/60Hz
Power 100% 15 KVA 15 KVA
Max input current 49 A 22 A
U0 290 V 320 V
Range 20 ÷ 105 A 20 ÷ 105 A
Cutting current 105A @ 100% 105A @ 100%
Insulation H H
Protec. Degree IP22S IP22S
Dimens. (LxWxH) 600X255X480 mm 600X255X480 mm
Box (LxWxH) 750X400X515 mm 750X400X515 mm
Weight box/net  47 / 45 kg 47 / 45 kg