Inverter DC ARC / TIG Welder

Inverter power sources designed to meet the needs of the most demanding users. Easy-to-use both in STICK welding and TIG welding with HF start. All main welding parameters can be adjusted by the user : in TIG welding, 2 stroke or 4 stroke mode, pre-gas, up-slope time, pulsation frequency, basic current, down-slope time, crater filler current, post-gas : in STICK welding Hot Start and Arc Force are adjustable.
Power Source in Case + Kit Accessories

Includes :
- Electrode holder with 3M cable
- Earth clamp with 3M cable
- Welding mask

Specifications
Description Unit GALILEO 175 GALILEO 215
Inpur Power
(1 ph) 230V – 50/60 Hz
Power 60% KVA 3,3 4
Uo V 65 65
Amp. Min-Max A 5 ÷ 160 5 ÷ 200
Amp. 60974-1 A 35% 160 60% 120 35% 200 60% 150
ØE mm 1,6 ÷ 3,2 1,6 ÷ 4
Insulation - H
Protec. Degree - IP22S
Weight
Kg 5,8 7
Three phases welding inverters designed to work with unstable supply voltages caused by the use of power generators and long connection lines, designed to meet the requirements of even the most demanding user with a wide current range and a high duty cycle. Excellent welding features guaranteed with all types of commercial electrodes (rutile, basic, stainless steel) due to the possibility to setup Arc Force and Hot Start values. The models 300C can also weld cellulosic and aluminium electrodes. Equipped with special features controlling excess input voltage, overheating and electrode sticking, functions which protect against instable generators even in the harshest working conditions. The TIG/MMA switch also enables use for TIG Lift Arc welding. Equipped with digital display to show welding current, welding voltage and other parameters (hot start and arc force). The generator is fitted with a VRD, which allows to work even in hazard environments. The VRD function can be switched on or off as required. All of them may be used with remote control

Standart accessories:
Earth clamp with cable 3M

Optional accessories:
Argon regulator, TIG torch (Air cooled or Water cooled),
Electrode holder, Water cooling unit, Remote control
Specifications
Description Unit GALILEO 300 C
Input Power
(3 ph) 400V
MMA TIG
Power 60% KVA 7 8
Uo V 12 60/80
Amp. Min-Max A 5 ÷ 300 5 ÷ 270
Amp. 60974-1 A 50% 300 100% 230 60% 270 100% 210
ØE mm - 1,6 ÷ 4
Insulation - H
Protec. Degree - IP22S
Weight
Kg 24
Inverter power sources designed to meet the needs of the most demanding users. Easy-to-use both in STICK welding and TIG welding with HF start. All main welding parameters can be adjusted by the user : in TIG welding, 2 stroke or 4 stroke mode, pre-gas, up-slope time, pulsation frequency, basic current, down-slope time, crater filler current, post-gas : in STICK welding Hot Start and Arc Force are adjustable. They are equipped with digital ammeter which shows welding current and preset parameters.
Power Source in Case + Kit Accessories

Includes : TIG Torch (Air cooled), Earth clamp, Electrode holder, Welding Mask

Optional : Argon regulator
Specifications
Description Unit GALILEO 215 HF
Input Power
(1 ph) 230V – 50/60 Hz
MMA TIG
Power 60% KVA 4 4
Uo V 65 65
Amp. Min-Max A 5 ÷ 160 5 ÷ 200
Amp. 60974-1 A 35% 160 60% 122 35% 200 60% 160
ØE mm 1,6 ÷ 4 -
Insulation - H
Protec. Degree - IP22S
Weight
Kg 7
Welding inverters designed to work with unstable supply voltages caused by the use of power units and long connection lines. Microprocessor controlled, they provide excellent MMA welding performance with most types of commercial electrodes and TIG welding with HF or LIFT arc ignition MMA: arc force and hot start preset to optimum for GLOBUS 225 HF and adjustable for COMPACT 305 HF. TIG values: 2-stroke, 4-stroke, 2-stroke pulsated or 4-stroke pulsated. Down Slope and Post Gas are adjustable. COMPACT 305HF model is fitted with a digital instrument panel which displays both welding current and voltage, all welding parameters are adjustable from the front panel. The unit is fitted with VRD function, which allows the user to work safely even in hazard environments. The VRD function can be switched on or off as required. It can also be used with a remote control or foot pedal control.

Standart accessories:
Earth clamp with cable 3M

Optional accessories:
Argon regulator, TIG torch (Air cooled or Water cooled),
Electrode holder, Water cooling unit, Remote control

Specifications
Description Unit COMPACT 305 HF
Input Power
(3 ph) 400V
MMA TIG
Power 60% KVA 7 8
Uo V 12 60/80
Amp. Min-Max A 5 ÷ 300 5 ÷ 270
Amp. 60974-1 A 50% 300 100% 230 60% 270 100% 210
ØE mm - 1,6 ÷ 4
Insulation - H
Protec. Degree - IP22S
Weight
Kg 23.6