Wind Speed – Magnetic Drilling | PT Abadi Baru Teknikatama

Designed to use T.C.T. Broach Cutter.
Cuts up to diameter 35 mm and 50 mm deep.
Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”.
Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily.
The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life.
Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety.
Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch.
Light weight, only 14 Kg.

Designed to use T.C.T. Broach Cutter.
Cuts up to diameter 45 mm and 50 mm deep.
Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”.
Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily.
The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life.
Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety.
Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch.
Light weight, only 15 Kg.

Designed to use T.C.T. Broach Cutter.
The machine has been designed with 2 speed (low and high speed) options that allow the operator to make an appropriate choice R.PM.
Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”.
Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily.
The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life.
Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety.
Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch.
Light weight, only 23 Kg.