Powerful, robust and compact, SHARK 105 absolutely grants high productivity in the toughest cutting operations without any compromise: cuts are always precise and ensure the highest cutting results in all applications.
Top cutting quality at high speed by means of SK 125 HPC High-Performance-Cutting technology torch, granting a powerful and concentrated cutting beam. Smart Start Transfer and Smart End Cutting functions permit both initial and final cutting phases in the best way.
SHARK 125 is equipped with display for managing all the digital control. In combination with the technology HPC High-Performance-Cutting of the torch SK125, it grants to every user a cutting beam very concentrated and hot.
This feature allows a very high precision and speed in cutting for a wide range of thickness. Shark 125 has also the special function Smart Start Transfer and Smart End Cutting for a better management of the cut during the start and end.
TECHNICAL DATA | SHARK 105 | SHARK 125 | ||
Input Voltage 50/60 Hz | V | 400-3ph | 400-3ph | |
Input Power @ I2 max | kVA | 15 | 21 | |
Delayed Fuse (I2 @ 100%) | A | 16 | 30 | |
Power Factor / cos φ | 0,90/0,99 | 0,89/0,99 | ||
Efficency Degree | % | 85 | 86 | |
Current range | A | 20 ÷ 100 | 25 ÷ 120 | |
Duty Cycle (40°C) | 100% | A | 70 | 100 |
60% | A | 90 | 120 | |
40% | A | 100 | – | |
Motorgenerator requirement for full capacity | kVA | 30 | 40 | |
Cutting Capacity | Recommended | mm | 30 | 40 |
Maximum | mm | 35 | 45 | |
Severange | mm | 40 | 50 | |
Piercing | mm | 20 | 25 | |
Gas supply | Air / N2 | Air / N2 | ||
Gas Pressure | bar | 5,0 ÷ 6,0 | 5,0 ÷ 6,0 | |
Gas Flow | l/min | 280 ÷ 330 | 280 ÷ 330 | |
Protection Class | IP | 23 S | 23 S | |
Dimension | Width | mm | 390 | 515 |
Length | mm | 185 | 290 | |
Height | mm | 595 | 730 | |
Weight | kg | 24 | 48 |