Inverter DC ARC / TIG Welder
Inverter power sources designed to meet the needs of the most demanding users. Easy-to-use both in STICK welding and TIG welding with HF start. All main welding parameters can be adjusted by the user : in TIG welding, 2 stroke or 4 stroke mode, pre-gas, up-slope time, pulsation frequency, basic current, down-slope time, crater filler current, post-gas : in STICK welding Hot Start and Arc Force are adjustable.
Power Source in Case + Kit Accessories
Includes :
- Electrode holder with 3M cable
- Earth clamp with 3M cable
- Welding mask
Specifications
Description |
Unit |
GALILEO 175 |
GALILEO 215 |
|
(1 ph) |
230V – 50/60 Hz |
Power 60% |
KVA |
3,3 |
4 |
Uo |
V |
65 |
65 |
Amp. Min-Max |
A |
5 ÷ 160 |
5 ÷ 200 |
Amp. 60974-1 |
A |
35% 160
60% 120 |
35% 200
60% 150 |
ØE |
mm |
1,6 ÷ 3,2 |
1,6 ÷ 4 |
Insulation |
- |
H |
Protec. Degree |
- |
IP22S |
|
Kg |
5,8 |
7 |
Three phases welding inverters designed to work with unstable supply voltages
caused by the use of power generators and long connection lines, designed to meet the
requirements of even the most demanding user with a wide current range and a high duty cycle.
Excellent welding features guaranteed with all types of commercial electrodes (rutile, basic,
stainless steel) due to the possibility to setup Arc Force and Hot Start values. The models 300C
can also weld cellulosic and aluminium electrodes. Equipped with special features
controlling excess input voltage, overheating and electrode sticking, functions which protect against
instable generators even in the harshest working conditions. The TIG/MMA switch also enables use
for TIG Lift Arc welding. Equipped with digital display to show welding current, welding voltage and
other parameters (hot start and arc force). The generator is fitted with a VRD, which allows to work
even in hazard environments. The VRD function can be switched on or off as required. All of them
may be used with remote control
Standart accessories:
Earth clamp with cable 3M
Optional accessories:
Argon regulator, TIG torch (Air cooled or Water cooled),
Electrode holder, Water cooling unit, Remote control
Specifications
Description |
Unit |
GALILEO 300 C |
|
(3 ph) |
400V |
|
MMA |
TIG |
Power 60% |
KVA |
7 |
8 |
Uo |
V |
12 |
60/80 |
Amp. Min-Max |
A |
5 ÷ 300 |
5 ÷ 270 |
Amp. 60974-1 |
A |
50% 300
100% 230 |
60% 270
100% 210 |
ØE |
mm |
- |
1,6 ÷ 4 |
Insulation |
- |
H |
Protec. Degree |
- |
IP22S |
|
Kg |
24 |
Inverter power sources designed to meet the needs of the most demanding users. Easy-to-use both in STICK welding and TIG welding with HF start. All main welding parameters can be adjusted by the user : in TIG welding, 2 stroke or 4 stroke mode, pre-gas, up-slope time, pulsation frequency, basic current, down-slope time, crater filler current, post-gas : in STICK welding Hot Start and Arc Force are adjustable. They are equipped with digital ammeter which shows welding current and preset parameters.
Power Source in Case + Kit Accessories
Includes :
TIG Torch (Air cooled), Earth clamp, Electrode holder, Welding Mask
Optional :
Argon regulator
Specifications
Description |
Unit |
GALILEO 215 HF |
|
(1 ph) |
230V – 50/60 Hz |
|
MMA |
TIG |
Power 60% |
KVA |
4 |
4 |
Uo |
V |
65 |
65 |
Amp. Min-Max |
A |
5 ÷ 160 |
5 ÷ 200 |
Amp. 60974-1 |
A |
35% 160
60% 122 |
35% 200
60% 160 |
ØE |
mm |
1,6 ÷ 4 |
- |
Insulation |
- |
H |
Protec. Degree |
- |
IP22S |
|
Kg |
7 |
Welding inverters designed to work with unstable supply voltages caused by the
use of power units and long connection lines. Microprocessor controlled, they provide excellent
MMA welding performance with most types of commercial electrodes and TIG welding with HF or
LIFT arc ignition
MMA: arc force and hot start preset to optimum for GLOBUS 225 HF and adjustable for COMPACT
305 HF. TIG values: 2-stroke, 4-stroke, 2-stroke pulsated or 4-stroke pulsated.
Down Slope and Post Gas are adjustable.
COMPACT 305HF model is fitted with a digital instrument panel which displays both welding current
and voltage, all welding parameters are adjustable from the front panel. The unit is fitted with VRD
function, which allows the user to work safely even in hazard environments. The VRD function can
be switched on or off as required. It can also be used with a remote control or foot pedal control.
Standart accessories:
Earth clamp with cable 3M
Optional accessories:
Argon regulator, TIG torch (Air cooled or Water cooled),
Electrode holder, Water cooling unit, Remote control
Specifications
Description |
Unit |
COMPACT 305 HF |
|
(3 ph) |
400V |
|
MMA |
TIG |
Power 60% |
KVA |
7 |
8 |
Uo |
V |
12 |
60/80 |
Amp. Min-Max |
A |
5 ÷ 300 |
5 ÷ 270 |
Amp. 60974-1 |
A |
50% 300
100% 230 |
60% 270
100% 210 |
ØE |
mm |
- |
1,6 ÷ 4 |
Insulation |
- |
H |
Protec. Degree |
- |
IP22S |
|
Kg |
23.6 |