Portable Pipe Beveller (Pro 10-PB)

PRO 10PB is a heavy duty pipe Beveller designed for portable use in pipe machining operations.
Self-centering expandable mandrels provide quick and proper alignment to a pipe or a tube prior to machining operations.
PRO 10 PB is able to bevel, face off, ID chamfer, counterbore and J-beveling, making all these weld prep operations quick and simple.
Depending on users preferences and on site conditions PRO 10 PB machine can be operated with a high quality powerful pneumatic motor or top quality high torque electric motor.


PRO-2 PB ( COMPACT PIPE BEVELLER )

PRO-2 PB is a compact, handy pipe beveller that mills pipes made of carbon and stainless steel, aluminum alloys, and copper-nickels. The machine can face off and bevel pipes from inner diameters (ID) of 19.5 mm (0.77”) to outer diameters (OD) of 48 mm (1.89”).
Small pipes from ID 15.5 mm (0.61”) up to OD 29 mm (1.14”) can be beveled with optional small mandrel set.
PRO-2 PB is able to mill also larger pipes from ID 38 mm (1.50”) up to OD 60.3 mm (2.37”) by means of an optional extension set
Its exceptionally narrow housing (only 48 mm wide) makes it perfectly suited to space restricted areas such as boiler water walls.
PRO-2 PB incorporates overload systems incl. wet multi-disk friction clutch to prevent gear damage if thetool gets stuck

PRO-5 PB ( PORTABLE PIPE BEVELLER )

PRO-5 PB is a handy, portable pipe beveling machine suitable for milling edges of pipes made of carbon and stainless steels, aluminum alloys and copper-nickels.
It can be used ef?ciently by a single operator.
Self-centering expandable mandrels provide quick and proper alignment to a pipe or a tube prior to machining operations.
Depending on the tool bits in use PRO-5 PB can perform external beveling, J-beveling, internal calibration and facing pipes from inside diameters of 32 mm (1.26’’) to outside diameters of 114 mm (4.49’’) or up to 140 mm (5.51”) as option.
All these weld prep operations are made fast and easy. Up to three tool bits can be mounted and work, simultaneously.
According to users preferences and depending on site conditions PRO-5 PB machine can be operated with a high quality powerful pneumatic motor, top quality high torque electric motor or battery drive.
Optional small spindle disc and ratchet wrench enable pipe machining in dif?cult to access and space restricted areas.

PRO-40 PBS ( PIPE BEVELLER MACHINE)

PRO 40 PBS is designed for beveling and facing pipes, tanks or tubes in a range of diameters from 200 mm to 1000 mm (8-40”).
High-speed rotary milling head with replaceable inserts enables effective and efficient
machining with bevel widths up to 45 mm (1-3/4”) and angles between 0 and 60
Internal beveling and J-groove end preparation is optionally available.

× How can I help you?