Promotech has products that are characterized to be able to back up all the tools needed in industrial manufacturing consumers, thus our products can always be trusted and trusted in several vital sectors, thus the cost of maintaining and maintaining our products is very cheap and easy to apply to the needs needed.
Automatic Bevelling Machine (ABM-14)
Features
- fast and efficient
- bevels both small and large pieces to cover most of the common applications for its type
- auto feed on large plates with optional trolley
- beveling of lower edge in inverted position • standard shearing cutter for machining carbon steel
- 2 optional shearing cutters dedicated to stainless/alloyed steel and aluminum
- reversible spindle against stuck milling tool
- versatile and transportable on its own trolley
- low noise
Promotech BM-16
Portable, handy beveling machine is designed for milling edges of plates and pipes made of steel, aluminum alloys, brass, or plastic. Depending on the chosen milling head the machine enables beveling materials with minimum thickness of 1.5 mm (0.06’’) at the angles of 22.5°, 30°, 37.5°, 45°, 55°or 60°and with maximum bevel width of 16 mm (0.63’’).
Each milling head uses 5 indexable cutting inserts. One milling head for beveling radious enables beveling edges with radius of 3, 4 or 5mm with use of 4-sided indexable R3, R4 or R5 cutting inserts. Countersinking of holes with minimum 40 mm (1.57’’) diameter is also possible. BM-16 is equipped with continuous bevel width adjustment, overload protection and electronic speed control for use on a variety of materials. It is highly efficient machine for edge weld preparation and rounding off steel construction before painting or coating.
Basic set:
- BM-16 beveling machine without accessories (see list below)
- Metal box
- 32mm flat wrench
- Allen wrench hex s=5
- Allen wrench hex s=14
- Operator’s Manual (English)
SPECIFICATION |
Power supply |
220-240 V / 50-60 Hz |
Motor |
2200W |
Spindle speed (without load) |
1800–5850 rpm |
Maximum bevel width |
b=16 mm (0.63’’, Figure 1) |
Bevel angle (depending on milling head) |
22.5°, 30°, 37.5°, 45°, 55°, 60°(Fig.1) |
Minimal diameter of countersinking |
ca 40 mm (1.57’’) |
Rounding edges |
R3, R4, R5 (Fig. 2) |
Dimensions (L x W x H) |
585 mm (23.0’’) × 156 mm (6.1’’) × 238 mm (9.4’’) |
Weight (without milling head) |
10 kg (22 lbs) |
Product code (220-240 VAC) |
UKS-0509-10-20-00-0 |
Product code (110-120 VAC) |
UKS-0509-10-10-00-0 |
Promotech BM-21
Most important features include:
- new single milling head equipped with 10 square inserts, that makes machining process far more efficient with little operator’s effort
- fast and easy exchange of inserts with no need for special adjustment
- extended working range from 0 to 60 degrees with continuous angle adjustment
- easy setting of bevel angle and bevel width
- vibration insulation protects both the operator and electronics against vibration
- one universal guide plate for beveling both plates and pipes replaces 3 different attachments used with BM-20
SPECIFICATION |
Power supply |
230VAC/50Hz or 115 VAC/60 Hz |
Induction motor |
with increased start-up current |
Power |
1100 W, BM-21S: 1600 W (for 50 Hz); 1800 W (for 60 Hz) |
Spindle speed |
2820 rpm, BM-21S: 1360–1630 rpm (at 230 V) and 1300–1560 rpm (at 115 V) |
Tooling |
integrated milling head with 10 square TCT inserts |
Beveling angle |
0-60°with continuous angle adjustment |
Max bevel width |
21 mm |
Weight |
20 kg (43 lbs), BM-21S: 23 kg (51 lbs) |
Promotech BM-21 S
Features and Benefit:
- low speed motor suitable for machining stainless steel
- guide plate with guide rolls made of stainless steel
- up to 21 mm bevel width at 45
- beveling angles adjusted continuously between 0 to 60
- new single milling head equipped with 10 square inserts makes machining process far more
- fast and easy inserts exchange with no need for special adjustment
- easy setting of bevel angle and bevel width
- vibration insulation protects both the operator and electronics against vibration
- one universal guide plate for beveling both plates and pipes
Promotech BM-25
Features and Benefit:
- Comfort and ergonomics of work
- Continuously adjustable bevel angle between 0 and 90 degrees
- Single head operates with face milling method
- Maximum 25 mm bevel width (more than one pass could be required)
- Continuous bevel width adjustment
- Powerful electric motor
- Milling head is equipped with 5 pcs of 2-sided indexable cutting inserts
- Electronic speed control between 1800–5850 rpm
- Overload protection
Promotech Offers Comprehensive range of drilling and punching machine, plate and pipe bevelers as well as welding automation equipment
Promotech is a product consisting of magnetic drills automatic welding machine carriage, plate & pipe bevelin, rail drilling machine and hydraulic punching as well as several other additional parts and accessories.
Promotech has product advantages that have been recognized by several countries in this industry, and several experts and industrial professionals very often recommend our products, not only the experience they have but based on this experience they have produced many developments both in terms of design, material durability, motor and battery strength of each of our products, with current advances we support activities by using and applications for operators to function properly and easily in this industrial world.
Promotech has products that are characterized to be able to back up all the tools needed in industrial manufacturing consumers, thus our products can always be trusted and trusted in several vital sectors, thus the cost of maintaining and maintaining our products is very cheap and easy to apply to the needs needed.